October 15, 2019

Alto Professional TS312 2000w 12-Inch Active Powered PA Loudspeaker

Alto Professional TS312 2000w 12-Inch Active Powered PA Loudspeaker
Alto Professional TS312 2000w 12-Inch Active Powered PA Loudspeaker
Alto Professional TS312 2000w 12-Inch Active Powered PA Loudspeaker

Alto Professional TS312 2000w 12-Inch Active Powered PA Loudspeaker
The Alto Professional TS3 range of speakers is a brand new series that delivers an impressive sound with clarity and is an excellent audio solution for any style of music and any application. A bi-amplified design works to give you high-quality, explosive audio without any compromises or restrictions and is perfect for mobile entertainers, music venues, schools and colleges, live events, club and bar venues, and theatres. The TS312 comes fitted with a 12-inch woofer as well as a 1.4-inch neodymium tweeter that both work in harmony to deliver the cleanest sound possible with a frequency response that ranges from 53 Hz all the way to 20 kHz and a maximum sound pressure level of 131dB. This speaker also comes equipped with a 2000w Class D amplifier with a bi-amplified design while newly constructed transducers work to give you the best possible sound. The TS312 is appropriate as either a main front of house speaker or as an on-stage monitor thanks to the rugged design that is made for rigorous everyday use. The rear of this speaker features two combo XLR/¼-inch connections alongside an integrated 2-channel mixer with two volume controls that allow you to input a signal directly from the audio source. There is also an XLR link output for linking multiple units together and an IEC power input as well as a ground-lift switch and a contour switch that enables you to apply a small amount of equalisation if you require. A built-in overdrive protector works to eliminate overloading the speakers transducers and eliminates distortion when your signal is too hot; there is also a clip limiter LED that lets you see when the incoming signal is peaking. The TS312 is housed in a super-robust injection-molded polypropylene enclosure that features a trapezoidal design that enables the speaker to be used as a stage monitor and has a design that is built for rigorous everyday use. A full perforated steel grille prevents the drivers from being damaged and is acoustically transparent. A 36mm standard pole mount allows you to mount the speaker to a speaker pole or make use of the multiple M10 rigging points that lets you install the speaker into almost any area. Alto Professional TS312 2000w 12-Inch Active Loudspeaker Key Features. 2000W peak, 1000W continuous Class D power. 12-inch (305 mm) LF driver, 3-inch (76 mm) high-temperature voice coil. 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide. High quality, lightweight, cabinet design for easy transport, set up and installation. Pole-mountable, wedge monitor, bracket installation or flown application with integral M10 suspension points. Integrated 2-channel mixer with dual XLR ¼-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch. Custom engineered high-efficiency class D amplifiers with passive cooling design No fan means the speaker runs cleaner, quieter and has greater long-term reliability. Design Origin: Designed and tuned in the USA. Alto Professional TS312 2000w 12-Inch Active Loudspeaker Technical Specifications. Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF). LF Driver: 12-inch (305 mm) LF driver, 3-inch (76 mm) high-temperature voice coil. HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide. Frequency Response: 53 Hz20 kHz (+/- 3 dB)Frequency Range: 46 Hz22 kHz (-10 dB). Horn Coverage: 90° H x 60° V nominal. Equalization: Contour Switch Low and High Frequency +3dB Boost. Connectors: (2) XLR/TRS ¼ (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input. Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch. Indicators: 2 x Power LED (front and rear), Clip limiter LED. Protection: Electronic clip, Thermal and transducer overdrive protection. Power Connection: IEC with Mains Fuse. AC Voltage Input: 100,110-120,220240 V, 50/60 Hz. Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille. Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB125 bracket, Flown application with integral M10 suspension points, Wedge monitor. Dimensions (HxWxD): 605mm x 354mm x 350mm. Net Weight: 16.3 kg. Accessories: TSB125 Bracket, TS212 Cover. The item “Alto Professional TS312 2000w 12-Inch Active Powered PA Loudspeaker” is in sale since Friday, April 5, 2019. This item is in the category “Sound & Vision\Performance & DJ Equipment\Speakers & Monitors”. The seller is “thedjshop” and is located in Southampton. This item can be shipped to United Kingdom.
  • Model: TS312
  • Colour: Black
  • Tweeter Size: 1.4″
  • Unit Quantity: 1
  • Type: PA Speaker
  • Features: Input Gain Control
  • Active/Passive: Active
  • RMS Power: 1000W
  • Woofer Size: 12″
  • Manufacturer warranty: 1 year
  • MPN: Does Not Apply
  • Brand: Alto

Alto Professional TS312 2000w 12-Inch Active Powered PA Loudspeaker